ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º º º Stealth 3D 3000 Series README File º º ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ º º º º Rel: 0697 º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ This README file contains the following information: 1. General Notes 2. Installation 2.1 Installation under Windows 3.1x / Windows 95 2.2 Installing the OS/2 Driver 2.3 Installing the Windows NT 3.51 Driver 2.4 Installing the Windows NT 4.0 Driver 3. Choosing a Monitor 4. Known Restrictions 5. Support / Service / Latest Software 1. General Notes ================ IMPORTANT! You must IMPERATIVELY read this README file and all the documentation supplied BEFORE you continue the installation! Otherwise the company cannot accept any responsibility for claims that may be caused as a consequence. Please be aware that you can only take full advantage of the features provided by the Stealth 3D 3000, if the other components of your system, especially the graphic monitor that is being used, also comply with the specifications of the Stealth 3D 3000. (Example : The resolution 1280x1024 that is supported by the Stealth 3D 3000 can obviously not be used with a monitor that is specified to only support resolutions up to 1024x768). 2. Installation =============== The program calls stated below refer to the installation from the installation disks and the SuperCD ('SuperCD'). If you have only floppies in the box, the software at the floppies will be newer as the current CD. 2.1 Installation under Windows 3.1x / Windows 95 ================================================= Note: The install program detects your operatin system and installs the correct drivers. Select the menu items 'File' and then 'Run' in the Windows Program Manager. Then enter: a) (Disk) b) (SuperCD) A:\INSTALL :START For further information, execute the file README.BAT in the path: :\INSTALL\GRAPHIC\STEALTH\3D3000\WIN95 (for Windows 95) 2.2 Installing the OS/2 Driver ============================== A driver for OS/2 is available at our BBS or on the Internet www.diamondmm.de. Please read the file README.TXT that comes with the driver. 2.3 Installing the Windows NT 3.51 Driver ========================================= Please execute README.BAT in the path: :\INSTALL\GRAPHIC\STEALTH\3D3000\NT 2.4 Installing the Windows NT 4.0 Driver ========================================= Please execute README.BAT in the path: :\INSTALL\GRAPHIC\STEALTH\3D3000\NT4 3. Choosing a Monitor ====================== As mentioned above, the graphics monitor you choose to use with your board should be technically suitable for use with your Stealth 3D 3000 board in order to be able fully utilize this. *** IMPORTANT *** Only use settings that your monitor supports. If you use the monitor outside the specified ratings then it may suffer permanent damage! If you change the monitor then you must compare the ratings first and should reconfigure accordingly! 4. Restrictions =============== Driver for AutoCAD, Microstation 3DStudio are not yet available. If they are available, you can get them from our online Services. The MPEG Module MVP1100 is not supported. 5. Support / Service / Latest Software ====================================== Please note the SuperCD for most current information about all our support services. To get this information please call the program "START" and select the menu item "Information". ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º End of README º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ